Build your desk here
What is on screen now is our standard size, not your order. Change the answers below to your own measurements — the drawing and the price update as you go. Nothing is locked in, and nothing is ordered until you have a written price. How this works
Pick one to start, then change anything. Nothing is locked.
Measure the doorway it has to go through before you order. A welded frame that will not turn through the opening cannot be fixed on the day.
The clear opening, not the door leaf — measure between the frames with the door open, and check any passage or stair corner it has to turn on the way in. Left alone we check against a standard 760 mm inside door, but that is our assumption, not your measurement. If you already know a welded frame will not go in, tick Bolt-together frame below. A piece that cannot be carried in on the day is not something we can put right at our cost.
Two arms, each its own length and depth, form one L-shaped top banded round the corner. Just measure each wall.
Two arms make the L. Arm A is the main top you sized in steps 1–2, along the first wall. Arm B is the return — the shorter leg of the L that runs along the second wall, set here.
Advanced
More inset looks lighter, more "floating". Less gives more end support.
Every colour costs the same: two coats, priced by the steel there is to cover.
Each shelf is a welded steel sub-frame with a board top, priced off the tube and board used.
The runners are 450 mm, so past that the box is deeper than the drawers that slide in it — useful if you want the back closed off, wasted if you do not.
The box hangs under the front of the desk, inboard of that end's leg. Runners are 450 mm soft-close ball bearing, bought in — the carcass is the same board as your top.
The shelf runs between the legs, so it can never overhang the ends. How shallow it can go depends on the frame — the rails sit on the legs, and the board has to cover them.
We build one-offs all the time. Whatever you type here goes on the build sheet and we price it with the rest — it just will not appear in the drawing above, because the 3D preview can only show the options listed here.
Measured off the legs, so it never lands on one. On a narrow desk with the legs well in, it moves inboard until it fits.
A separate stand — lift it off, or move it to another desk.
Each shelf sits on its own welded rail pair, so you can place it exactly where you need it.
Enter your kit's real size and it's drawn to scale on the desk. Anything that won't fit turns red and shows you by how much. Drag pieces in the drawing to reposition them.
Millimetres, measured off the thing itself. Or start from one of these:
Your own equipment is never charged for — it's just drawn in to check the fit.
Each desk: materials plus welding and painting. Delivery is R 300 for the whole order, however many you buy.
Delivered assembled, carried in and levelled where you want it. R 300 anywhere in Pretoria, added on top of the price above. Outside Pretoria we don’t deliver — you’re welcome to collect from the workshop.
Shortcuts — only if you want them
AI turns your description into a real design right away — no waiting on us, nothing to review. Change anything afterwards.
A dot means it's already set. Tap any item to jump straight to that step — or describe what you want in the box above and we'll find it, spelling and all.
Your build sheet
This is exactly what gets made.
Priced off today's real material and labour costs. We confirm everything in writing within one working day — nothing is due until it's built.
Watch one of these get built You are about to pay half up front to someone you have never met. Every step is filmed — cutting, welding, grinding, paint, the top going on.Not ready to send it?
Email this design to yourself.
We’ll send you a link straight back to this exact design, with the price on it, so you can finish it later or show someone. It is not an order and we will not chase you.
Sent. Check your inbox — the link opens this design again, exactly as it is now.
Send it to the workshop
Nothing due until the price is confirmed in writing. Then a deposit to buy the materials, the rest on delivery.
It's on the bench list.
We've got your build sheet and we'll come back to you within one working day with the confirmed price and a date.
Build your table here
What is on screen now is our standard size, not your order. Change the answers below to your own measurements — the drawing and the price update as you go. Nothing is locked in, and nothing is ordered until you have a written price. How this works
Pick one to start, then change anything. Nothing is locked.
Measure the doorway it has to go through before you order. A welded frame that will not turn through the opening cannot be fixed on the day.
The clear opening, not the door leaf — measure between the frames with the door open, and check any passage or stair corner it has to turn on the way in. Left alone we check against a standard 760 mm inside door, but that is our assumption, not your measurement. If you already know a welded frame will not go in, tick Bolt-together frame below. A piece that cannot be carried in on the day is not something we can put right at our cost.
Measured off the legs, so it never lands on one. On a narrow top with the legs well in, it moves inboard until it fits.
Two arms, each its own length and depth, form one L-shaped top banded round the corner. Just measure each wall.
Advanced
More inset looks lighter, more "floating". Less gives more end support.
Every colour costs the same: two coats, priced by the steel there is to cover.
Each shelf is a welded steel sub-frame with a board top, priced off the tube and board used.
The shelf runs between the legs, so it can never overhang the ends. How shallow it can go depends on the frame — the rails sit on the legs, and the board has to cover them.
We build one-offs all the time. Whatever you type here goes on the build sheet and we price it with the rest — it just will not appear in the drawing above, because the 3D preview can only show the options listed here.
A separate stand — lift it off, or move it to another table.
Each shelf sits on its own welded rail pair, so you can place it exactly where you need it.
Enter something's real size and it's drawn to scale on the table. Anything that won't fit turns red and shows you by how much. Drag pieces in the drawing to reposition them.
Millimetres, measured off the thing itself. Or start from one of these:
Your own equipment is never charged for — it's just drawn in to check the fit.
Each table: materials plus welding and painting. Delivery is R 300 for the whole order, however many you buy.
Delivered assembled, carried in and levelled where you want it. R 300 anywhere in Pretoria, added on top of the price above. Outside Pretoria we don’t deliver — you’re welcome to collect from the workshop.
Shortcuts — only if you want them
AI turns your description into a real design right away — no waiting on us, nothing to review. Change anything afterwards.
A dot means it's already set. Tap any item to jump straight to that step — or describe what you want in the box above and we'll find it, spelling and all.
Your build sheet
This is exactly what gets made.
Priced off today's real material and labour costs. We confirm everything in writing within one working day — nothing is due until it's built.
Watch one of these get built You are about to pay half up front to someone you have never met. Every step is filmed — cutting, welding, grinding, paint, the top going on.Not ready to send it?
Email this design to yourself.
We’ll send you a link straight back to this exact design, with the price on it, so you can finish it later or show someone. It is not an order and we will not chase you.
Sent. Check your inbox — the link opens this design again, exactly as it is now.
Send it to the workshop
Nothing due until the price is confirmed in writing. Then a deposit to buy the materials, the rest on delivery.
It's on the bench list.
We've got your build sheet and we'll come back to you within one working day with the confirmed price and a date.
Build your workbench here
What is on screen now is our standard size, not your order. Change the answers below to your own measurements — the drawing and the price update as you go. Nothing is locked in, and nothing is ordered until you have a written price. How this works
Pick one to start, then change anything. Nothing is locked.
Measure the doorway it has to go through before you order. A welded frame that will not turn through the opening cannot be fixed on the day.
The clear opening, not the door leaf — measure between the frames with the door open, and check any passage or stair corner it has to turn on the way in. Left alone we check against a standard 760 mm inside door, but that is our assumption, not your measurement. If you already know a welded frame will not go in, tick Bolt-together frame below. A piece that cannot be carried in on the day is not something we can put right at our cost.
Measured off the legs, so it never lands on one. On a narrow top with the legs well in, it moves inboard until it fits.
The right bench height comes off your own elbow height, not a standard number — too high and your shoulders ache, too low and you're hunched over. Enter your height and what it's mostly for.
A starting point, not a fitting — everyone's proportions differ a little. The M10 levelling feet give you a bit of adjustment either way once it's built.
Less inset puts more steel right under the edge — usual for a bench that takes knocks.
Only steel plate is offered here — no checker tread, no ply. Every bench this page builds is weld- and grind-safe by default, so there's no weaker option to pick by mistake.
Every colour costs the same: two coats, priced by the steel there is to cover. The top itself is always left bare — that's what makes it safe to weld and grind on.
Each one is real steel, welded or bolted on — priced off what it actually uses, same as the rest of the bench.
We build one-offs all the time. Whatever you type here goes on the build sheet and we price it with the rest — it just will not appear in the drawing above, because the 3D preview can only show the options listed here.
Each bench: materials plus welding and painting. Delivery is R 300 for the whole order, however many you buy.
Delivered assembled, carried in and levelled where you want it. R 300 anywhere in Pretoria, added on top of the price above. Outside Pretoria we don’t deliver — you’re welcome to collect from the workshop.
Shortcuts — only if you want them
AI turns your description into a real design right away — no waiting on us, nothing to review. Change anything afterwards.
A dot means it's already set. Tap any item to jump straight to that step — or describe what you want in the box above and we'll find it, spelling and all.
Your build sheet
This is exactly what gets made.
The price is today's merchant cost for plate, steel and paint, measured against your actual drawing, plus separate flat fees for welding and painting — each priced by the joint or the job, not as a percentage of materials. Nothing is due to start — we carry all the materials and the bench work until it's finished; the full amount is due on delivery, before it's handed over. Delivery is R 300 anywhere in Pretoria, or collect from the workshop free. We confirm everything in writing within one working day, and flag any change before you pay.
Watch one of these get built You are about to pay half up front to someone you have never met. Every step is filmed — cutting, welding, grinding, paint, the top going on.Not ready to send it?
Email this design to yourself.
We’ll send you a link straight back to this exact design, with the price on it, so you can finish it later or show someone. It is not an order and we will not chase you.
Sent. Check your inbox — the link opens this design again, exactly as it is now.
Send it to the workshop
Nothing due until the price is confirmed in writing. Then a deposit to buy the materials, the rest on delivery.
It's on the bench list.
We've got your build sheet and we'll come back to you within one working day with the confirmed price and a date.
What you draw is what turns up.
This one was designed in the builder above, then cut, welded and delivered. Same frame, same shelves, same board.
Drawn in the builder above — A-frame legs, two-shelf side unit.
The finished desk, out of the Pretoria workshop. Not a render.
Every price on this page is worked out against the drawing you're looking at — so the thing you design is the thing that gets made.
From screen to floor
Three steps, no back-and-forth.
You draw it
Set the size, board, frame and colour. The price moves as you go.
We confirm it
We confirm the price in writing and a date, within one working day.
We build and deliver
Cut, welded, coated and assembled — then delivered and levelled in your room.
Before you send it